Indoor Access Point (108Mbps Turbo)
The Anaptyx Mesh ID-2 is a carrier-class Mesh device, capable of operating in high bandwidth demand, client-intensive environments. This robust product features two high-powered, Atheros-based mini-PCI radios with the mesh radio user-selectable between the 2.4 GHz and 5 GHz bands. The two-radio design is ideally suited for use in Mesh Node/Gateway applications - one radio dedicated for meshing to an auto negotiated Mesh Node (creating a self-forming, self-healing network architecture) while the other radio is dedicated for service set broadcasting. As a repeater, the ID-2 provides WiFi connectivity while acting as a wired network connection for terminal network devices via the POE enabled RJ45 port.
The ID-2 features a powerful 680MHz processor board, capable of maintaining seamless Mesh WiFi operation in even the most bandwidth-intensive applications and features three internal antennas for consistent coverage in even the most complex RF environments. On the mesh, this device is capable of speeds up to 108Mbps between other turbo capable Anaptyx Mesh devices.
* Antenna's and power supply sold separately.
The Anaptyx Mesh ID-2 is a carrier-class Mesh device, capable of operating in high bandwidth demand, client-intensive environments. This robust product features two high-powered, Atheros-based mini-PCI radios with the mesh radio user-selectable between the 2.4 GHz and 5 GHz bands. The two-radio design is ideally suited for use in Mesh Node/Gateway applications - one radio dedicated for meshing to an auto negotiated Mesh Node (creating a self-forming, self-healing network architecture) while the other radio is dedicated for service set broadcasting. As a repeater, the ID-2 provides WiFi connectivity while acting as a wired network connection for terminal network devices via the POE enabled RJ45 port.
The ID-2 features a powerful 680MHz processor board, capable of maintaining seamless Mesh WiFi operation in even the most bandwidth-intensive applications and features three internal antennas for consistent coverage in even the most complex RF environments. On the mesh, this device is capable of speeds up to 108Mbps between other turbo capable Anaptyx Mesh devices.
* Antenna's and power supply sold separately.
Product Features
- Open-Mesh Compatible (Control via Open-Mesh dashboard)
- Fully Supported Over the Air Firmware Updates
- Two Fully Functioning 10/100 LAN Ports
- High output power radios (up to 350mW on the Mesh Radio)
- Dual Radio Mesh Gateway/Repeater Support (802.11a/b/g)
- Turbo A/G Mesh Backhaul Radio (108Mbps Capable)
- Fully Supported Over the Air Firmware Updates
- Two Fully Functioning 10/100 LAN Ports
- High output power radios (up to 350mW on the Mesh Radio)
- Dual Radio Mesh Gateway/Repeater Support (802.11a/b/g)
- Turbo A/G Mesh Backhaul Radio (108Mbps Capable)
Recommended Uses
High User Density Deployments
- Two radios mesh devices serve up to twice as many clients as single radio access points.
- Two radio design allows for higher propagation of bandwidth per access point.
Performance Critical Networks
- Provide high-speed access to support bandwidth intensive applications such as streaming video.
- The highest performance is achieved when each AP is connected as a gateway.
Networks Requiring Sophisticated Mesh
- Dual-radio design allows several access points to wirelessly share the same connection with minimal drop in client performance.
- Reduced installation cost due to fewer required gateways.
Networks in Challenging Interference Environments
- Environments with high levels of RF interference.
- Buildings/networks saturated with 2.4 GHz can benefit from the mesh radio operating at 5 GHz.
- Two radios mesh devices serve up to twice as many clients as single radio access points.
- Two radio design allows for higher propagation of bandwidth per access point.
Performance Critical Networks
- Provide high-speed access to support bandwidth intensive applications such as streaming video.
- The highest performance is achieved when each AP is connected as a gateway.
Networks Requiring Sophisticated Mesh
- Dual-radio design allows several access points to wirelessly share the same connection with minimal drop in client performance.
- Reduced installation cost due to fewer required gateways.
Networks in Challenging Interference Environments
- Environments with high levels of RF interference.
- Buildings/networks saturated with 2.4 GHz can benefit from the mesh radio operating at 5 GHz.
Specifications
Radios
- One 802.11a/b/g Radio 350mw max (For Mesh), One 802.11b/g/ Radio 250mw max (For Clients)
- Concurrent operation in 2.4 and 5 GHz bands (Operate Mesh @ 5 GHz and Clients at 2.4 GHz)
- Auto-selection of optimal client 2.4 GHz frequency
- Max radio rate 54 Mbit/s for clients and 108mbps for mesh
Frequency
US
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.725 -5.825 GHz (UNII-3)
Europe
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350, 5.470-5.725 GHz (UNII-2)
Power
- Power over Ethernet: 15 - 24 V (802.3af Upgradeable)
- Power consumption: 12W max; 7 W typical
- Power over Ethernet injector & Power adapter available separately
- Advanced Power Save Mode
Mounting
Standard (Included)
- Desktop
- Wall/Surface Mount
Environment
- Operating temperature: - 22° F to 167° F (-30° C to 75° C)
- Humidity: 5 to 90% non-condensing
Physical Dimensions
- 8.5” x 6.6” x 1.7” (216 mm x 168 mm x 43 mm)
- Weight: 7.4 oz (0.21 kg)
Antennae
- Integrated omni-directional antennas (2 Main, 1 Diversity)
- Gain: 2 dBi @ 2.4 GHz, 4 dBi @ 5 GHz
Interfaces
- 1 x 10/100 Base-T (RJ45) with < 24V DC POE (WAN)
- 2 x 10/100 Base -T (RJ45) (LAN)
Transmitters (Output Power/Receive Sensitivity)
IEEE 802.11a (Mesh):
24dBm / -90dBm @ 6Mbps 19dBm / -70dBm @ 54Mbps
IEEE 802.11b (Mesh):
25dBm / -92dBm @ 1Mbps 25dBm / -87dBm @ 11Mbps
IEEE 802.11g (Mesh)
25dBm / -90dBm @ 6Mbps 20dBm / -70dBm @ 54Mbps
IEEE 802.11b (Client):
27dBm / -95dBm @ 1Mbps 27dBm / -90dBm @ 11Mbps
IEEE 802.11g (Client):
19dBm / -88dBm @ 6Mbps 19dBm / -74dBm @ 54Mbps
Regulatory
Product Safety Certifications
- RoHS
- FCC
- CE
Warranty
One Year Hardware Warranty Included
- One 802.11a/b/g Radio 350mw max (For Mesh), One 802.11b/g/ Radio 250mw max (For Clients)
- Concurrent operation in 2.4 and 5 GHz bands (Operate Mesh @ 5 GHz and Clients at 2.4 GHz)
- Auto-selection of optimal client 2.4 GHz frequency
- Max radio rate 54 Mbit/s for clients and 108mbps for mesh
Frequency
US
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.725 -5.825 GHz (UNII-3)
Europe
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350, 5.470-5.725 GHz (UNII-2)
Power
- Power over Ethernet: 15 - 24 V (802.3af Upgradeable)
- Power consumption: 12W max; 7 W typical
- Power over Ethernet injector & Power adapter available separately
- Advanced Power Save Mode
Mounting
Standard (Included)
- Desktop
- Wall/Surface Mount
Environment
- Operating temperature: - 22° F to 167° F (-30° C to 75° C)
- Humidity: 5 to 90% non-condensing
Physical Dimensions
- 8.5” x 6.6” x 1.7” (216 mm x 168 mm x 43 mm)
- Weight: 7.4 oz (0.21 kg)
Antennae
- Integrated omni-directional antennas (2 Main, 1 Diversity)
- Gain: 2 dBi @ 2.4 GHz, 4 dBi @ 5 GHz
Interfaces
- 1 x 10/100 Base-T (RJ45) with < 24V DC POE (WAN)
- 2 x 10/100 Base -T (RJ45) (LAN)
Transmitters (Output Power/Receive Sensitivity)
IEEE 802.11a (Mesh):
24dBm / -90dBm @ 6Mbps 19dBm / -70dBm @ 54Mbps
IEEE 802.11b (Mesh):
25dBm / -92dBm @ 1Mbps 25dBm / -87dBm @ 11Mbps
IEEE 802.11g (Mesh)
25dBm / -90dBm @ 6Mbps 20dBm / -70dBm @ 54Mbps
IEEE 802.11b (Client):
27dBm / -95dBm @ 1Mbps 27dBm / -90dBm @ 11Mbps
IEEE 802.11g (Client):
19dBm / -88dBm @ 6Mbps 19dBm / -74dBm @ 54Mbps
Regulatory
Product Safety Certifications
- RoHS
- FCC
- CE
Warranty
One Year Hardware Warranty Included
asdfasdf