Radios
- One 802.11a/b/g Radio 350mw max (For Mesh), One 802.11b/g/ Radio 250mw max (For Clients)
- Concurrent operation in 2.4 and 5 GHz bands (Operate Mesh @ 5 GHz and Clients at 2.4 GHz)
- Auto-selection of optimal client 2.4 GHz frequency
- Max radio rate 54 Mbit/s for clients and 108mbps for mesh

Frequency
US
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.725 -5.825 GHz (UNII-3)
Europe
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350, 5.470-5.725 GHz (UNII-2)

Power
- Power over Ethernet: 15 - 24 V (802.3af Upgradeable)
- Power consumption: 12W max; 7 W typical
- Power over Ethernet injector & Power adapter available separately
- Advanced Power Save Mode

Mounting
Standard (Included)
- Wall/Surface Mount
- Pole Mount
 
Environment
- Operating temperature: - 22° F to 167° F (-30° C to 75° C)
- Solar Heat Rise = ≤ 5° C above external ambient (When Powered Off)
- Humidity: 5 to 90% non-condensing
- NEMA 6 Enclosure Rating
- IP68 RJ45 Cable Bulkhead

Physical Dimensions
- 10” x 7.1” x 2.25” (181 mm x 156 mm x 51 mm)
- Weight: 49.3 oz (1.39 kg)

Antennae
- Two N-Type Antenna Connectors
* Antennas sold separately

Interfaces
- 1 x 10/100 Base-T (RJ45) with < 24V DC POE (Gateway/Internet Uplink)
- 2 x 10/100 Base -T (RJ45)

Transmitters (Output Power/Receive Sensitivity)
IEEE 802.11a (Mesh):
24dBm / -90dBm @ 6Mbps 19dBm / -70dBm @ 54Mbps

IEEE 802.11b (Mesh):
25dBm / -92dBm @ 1Mbps 25dBm / -87dBm @ 11Mbps

IEEE 802.11g (Mesh)
25dBm / -90dBm @ 6Mbps 20dBm / -70dBm @ 54Mbps

IEEE 802.11b (Client):
27dBm / -95dBm @ 1Mbps 27dBm / -90dBm @ 11Mbps

IEEE 802.11g (Client):
19dBm / -88dBm @ 6Mbps 19dBm / -74dBm @ 54Mbps

Regulatory
Product Safety Certifications
- RoHS
- FCC
- CE

Warranty
One Year Hardware Warranty Included
Outdoor Dual Radio Access Point (108Mbps Turbo)

The Anaptyx Mesh OD-2 is a carrier-class Mesh device, capable of operating in high bandwidth demand, client-intensive environments. This robust product features two high-powered, Atheros-based mini-PCI radios with the mesh radio user-selectable between the 2.4 GHz and 5 GHz bands. The two-radio design is ideally suited for use in Mesh Node/Gateway applications - one radio dedicated for meshing to an auto negotiated Mesh Node (creating a self-forming, self-healing network architecture) while the other radio is dedicated for service set broadcasting. As a repeater, the OD-2 provides WiFi connectivity while acting as a wired network connection for terminal network devices via the POE enabled RJ45 port.

The OD-2 features two N-Type antenna connectors for custom antenna application, and comes encased in a rugged NEMA 6 hinged aluminum enclosure. On the mesh, this device is capable of speeds up to 108Mbps between other turbo capable Anaptyx Mesh devices.

Buy Now

* Antenna's and power supply sold separately.


- Open-Mesh Compatible (Control via Open-Mesh dashboard)
- Fully Supported Over the Air Firmware Updates
- High output power radios (up to 350mW on the Mesh Radio)
- Dual Radio Mesh Gateway/Repeater Support (802.11a/b/g)
- Rugged, Die-Cast Aluminum Enclosure (NEMA 6 Rated)
- Dual N-Type Antenna Connectors
- IP68 Rated RJ-45 Bulkhead
- Turbo A/G Mesh Backhaul Radio (108Mbps Capable)


High User Density Deployments
- Two radios mesh devices serve up to twice as many clients as single radio access points.
- Two radio design allows for higher propagation of bandwidth per access point.

Performance Critical Networks
- Provide high-speed access to support bandwidth intensive applications such as streaming video.
- The highest performance is achieved when each AP is connected as a gateway.

Networks Requiring Sophisticated Mesh
- Dual-radio design allows several access points to wirelessly share the same connection with minimal drop in client performance.
- Reduced installation cost due to fewer required gateways.

Networks in Challenging Interference Environments
- Environments with high levels of RF interference.
- Buildings/networks saturated with 2.4 GHz can benefit from the mesh radio operating at 5 GHz.


Requires Flash Player 9
asdfasdf